TOP > Products & Solutions > Machining > Gas Laser Cutting Machines > MUSASHI VIth Series Gas Laser Cutting Machines

Gas Laser Cutting Machines
MUSASHI VIth Series Gas Laser Cutting Machines

This series of CO₂ laser cutting machines achieves high-quality cutting with low running costs.

MUSASHI VIth Series

The consumption of assist gas (N2) used for SUS non-oxidizing cutting is reduced by about 30% (compared to conventional Shibuya CO₂ Laser Cutting Machines).
The mirror can be inspected or cleaned without dismantling the mirrors or holders.
A combined cross airflow and suction extraction system provides efficient removal of fumes and dust.(compared to conventional Shibuya CO₂ Laser Cutting Machines)

Model	SPL6025 / SOL20V	SPL6030 / SOL20V
Laser oscillator	SOL20V
Rated output	2000 W
Cutting range	1550 × 2500 mm	1550 × 3080 mm
Max. loading capacity	374 kg (4' × 8' × 16 t)	585 kg (5' × 10' × 16 t)
Max. X/Y-axis speed	40 m/min
Z-axis movement range	250 mm
Z-axis movement speed	75 m/min
Number of controlled axes	3 (X, Y, Z)
Number of simultaneously controlled axes	2 (X, Y)
Drive method	All-axis AC servo motor
Least input increment	0.001 mm
Input power^※	3-phase, 200 V, 50/60 Hz 50.0 kVA
Machine dimensions	6250 (L) × 2950 (W) × 2310 (H) mm	6860 (L) × 2950 (W) × 2310 (H) mm
Machine weight^※	9700 kg	10100 kg

※: Values include the laser oscillator, chiller and other standard equipment.

■When selecting a SSL laser resonator, consult Shibuya separately.

Model	SSL250B	SSL400B	SSL1000	SOL20V
Oscillator type	Sealed, slab type			Middle-speed spiral axial flow type
Rated output	200 W	400 W	1000 W	2000 W
Output stability	±2%			±2%
Peak power	750 W	1000 W	2500 W	2000 W
Min. pulse width	2 μs			350 μs
Max. number of repetitions	100 kHz			2 kHz
Input power	3-phase, 200 V 50/60Hz 6.5kVA	3-phase, 200 V 50/60Hz 15.0kVA	3-phase, 200 V 50/60Hz 27.5kVA	3-phase, 200 V 50/60Hz 27.5kVA
Mixed gas consumption	No consumption due to a sealed laser			25 lit/h^※1 (12 lit/n in economy mode)
Weight	67 kg^※2	58 kg^※2	173 kg^※2	1300 kg

※1: Filler gas during machine stop and purge gas for starting operation is separately required. The consumption of laser gas when starting operation may be larger than the above depending on the machine stop time.
※2: Value indicates the weight of the laser oscillator itself and does not include the stand.

■Specifications are subject to change due to constant improvements.

Shibuya Corporation

Mechatronics Div., SILAS Sales Dept.
2-232 Wakamiya, Kanazawa, Ishikawa 920-0054 JAPAN Telephone : +81(76)263-8111 Fax : +81(76)262-2210