Other Cutting MachinesUSM1000 Tire Cutting Machines
This USM1000 cutting machine achieves high-quality cutting of test sample tires using CBN cutting wire.
Dedicated to Test Sample Tires
Model USM1000
Tire cutting section
Test sample tires are cut by turning an endless wire, which is adhered 100-micron size CBN grains, at ultra-high speed.
Features
- Generation of burrs on the iron core and melting of rubber is suppressed so that secondary processing is not required.
- The unique clamp mechanism enables handling of different tire sizes with the same clamp.
- A wire fully coated with CBN abrasives allows cutting not only in the forward direction but also in the backward direction.
- Since no coolant is required, there is no need for a drying process for the tires.
Specifications
| Model | USM1000 |
|---|---|
| Applicable tires | Outer dia. 500 to 900 mm |
| Tread width 140 to 300 mm | |
| Wall length 100 to 200 mm | |
| Weight Max. 50 kg | |
| Cutting speed | Max. 300 mm/min |
| Rapid feed rate | Max. 3000 mm/min |
| Wire peripheral speed | Max. 3000 m/min |
| Wire tilting angle | 10° to 30° (manual) |
| Input power | 3-phase, 200 V, 50/60 Hz, 8 kVA |
| Machine dimensions | 3150 (L) × 1590 (W) × 1700 (H) mm |
| Machine weight | 3500 kg |
■Specifications are subject to change due to constant improvements.
Contact Us
Shibuya Corporation
Mechatronics Div., SILAS Sales Dept.
2-232 Wakamiya, Kanazawa, Ishikawa 920-0054 JAPAN Telephone : +81(76)263-8111 Fax : +81(76)262-2210
2-232 Wakamiya, Kanazawa, Ishikawa 920-0054 JAPAN Telephone : +81(76)263-8111 Fax : +81(76)262-2210
E-mail sl-info@shibuya.co.jp
Case Studies
Showcasing DANTOTSU* product installations and real customer feedback.
Insights
Our ongoing commitment to pioneering the future of technology.
