MACHINING SYSTEMS
Three-Dimensional Fiber Laser Cutting MachineThis three-dimensional fiber laser cutting machine is established by adding a high-accuracy 3D drive axis to a ultra-precision fiber laser cutting machine.
Model SCF5113
Model SCF5113
Interference check screen for off-line teaching
Features
- Thanks to single mode fiber laser a minimum cutting width of 60 μm is achieved (with SFX500 mounted).
- This fiber laser cutting machine is equipped with a high-speed table (50 m/min).
- An all-in-one structure incorporating the fiber laser oscillator and CNC realizes a space-saving design.
- 2D cutting is available using plane cutting table.(optional)
- Off-line teaching system significantly saves setup time.(optional)
- A non-contact profiling axis (W: optional) is additionally available.
Specifications
| Model | SCF5113 | ||
|---|---|---|---|
| Laser oscillator | SFX500 | SFX1000B | SFX2000B |
| Rated output | 500 W | 1000 W | 2000 W |
| Cutting range | 800(X) × 500(Y) × 200(Z) mm | ||
| Rapid feed rate | 50 m/min | ||
| Number of controlled axes | 5 (X, Y, Z, A, C) + W (optional) | ||
| Drive method | AC servo motor (X, Y) | ||
| Least input increment | 0.001 mm | ||
| Input power※1 | 3-phase, 200 V, 50/60 Hz, 18.6 kVA | 3-phase, 200 V, 50/60 Hz, 22.6 kVA | 3-phase, 200 V, 50/60 Hz, 30.6 kVA |
| Machine dimensions※2 | 3285 (L) × 1890 (W) × 2600 (H) mm | ||
| Machine weight | 9000 kg | ||
- ※１ Values include the laser oscillator, chiller and other standard equipment.
- ※２ Installation space for the chiller unit is separately required.
- ■Specifications are subject to change due to constant improvements.
MACHINING SYSTEMS
Gate Type Three-Dimensional Fiber Laser Cutting MachineIt is a gate type Three-dimensional fiber laser cutting machine to set up easily.
Model SCF5230
Model SCF5230
High Tensile Strength Steel t1.2
Features
- The cutting head is protected by the escape mechanism to prevent crashes, eliminating the requirement of the cutting head normally required after a crash.
- Horizontal rotation axis(C-axis) of the cutting head moves ±720°.
- Cutting of aluminum, High Tensile Strength Steel is possible.
- Off-line teaching system significantly saves setup time.(optional)
Specifications
| Model | SCF5125 | SCF5225 | SCF5230 |
|---|---|---|---|
| Laser oscillator | SFX2000B | ||
| Rated output | 2000 W | ||
| Cutting range | 1000(X)×1700(Y)×600(Z) mm | 2000(X)×1700(Y)×600(Z) mm | 2500(X)×1700(Y)×600(Z) mm |
| Rapid feed rate | 24 m/min | ||
| Number of controlled axes | 6 (X, Y, Z, A, C, W) | ||
| Drive method | AC servo motor | ||
| Least input increment | 0.001 mm | ||
| Input power※1 | 3-phase, 200 V, 50/60 Hz, 38.0 kVA | 3-phase, 200 V, 50/60 Hz, 43.0 kVA | 3-phase, 200 V, 50/60 Hz, 43.0 kVA |
| Machine dimensions※2 | 5630 (L)×4210 (W)×3900 (H) mm | 6610 (L)×4210 (W)×3900 (H) mm | 7620 (L)×3600 (W)×4000 (H) mm |
| Machine weight | 11300 kg | 13000 kg | 13800 kg |
- ※１ Values include the laser oscillator, chiller and other standard equipment.
- ※２ Installation space for the chiller unit is separately required.
- ■Specifications are subject to change due to constant improvements.
- Inquiries
-
SHIBUYA CORPORATION
Mechatronics Div., SILAS Sales Dept.
2-232 Wakamiya, Kanazawa, Ishikawa 920-0054 JAPAN
TEL +81(76)263-8111 FAX +81(76)262-2210
E-mail sl-info@shibuya.co.jp